Giriş

Removing the keyboard may take a some effort and a little bit of patience, but you can do it!

  1. Locate and remove the two 5.3 mm Phillips #1 screws holding the back panel in place.
    • Locate and remove the two 5.3 mm Phillips #1 screws holding the back panel in place.

  2. Use a spudger to pry the panel up from the laptop case and remove it.
    • Use a spudger to pry the panel up from the laptop case and remove it.

    • The laptop should now be open with the RAM and wifi chip now accessible.

    • Locate the wifi chip.

    • Remove the 5 mm Phillips #1 screw holding the wifi chip in place.

    • Carefully remove the wifi chip.

    • Remove the 8, 9 mm Phillips #1 screws holding the panel in place.

    • Flip the computer over, and with a spudger, remove the black panel directly below the keyboard.

    • Remove the panel and flip it up onto the keyboard

    • With the panel removed, locate the USB port ribbon cable connecting to the motherboard.

    • Carefully disconnect the ribbon cable.

    • Unscrew the 5 mm Phillips #1 screw holding the USB ports in place.

    • The USB ports can now be removed from the laptop.

    • Flip the laptop and remove all 10 of the remaining 9mm screws from the back.

    • Use a spudger to gently lift the keyboard.

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 başka kişi bu kılavuzu tamamladı.

Alexander Lazar

Üyelik tarihi: 22-04-2014

324 İtibar

2 adet Kılavuz yazıldı

Takım

Cal Poly, Team 8-8, Regan Spring 2014 Cal Poly, Team 8-8, Regan Spring 2014 üyesi

CPSU-REGAN-S14S8G8

4 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 Gün: 13

Son 30 Gün: 34

Her zaman: 5,143