Ana içeriğe geç

Giriş

This guide will show you step-by-step instructions for replacing the display assembly. Removing the hard drive is not necessary, step 6, for completing this task. Also, make sure the unit is powered down before performing any of the following tasks.

  1. Flip laptop over so that the back is facing upward.
    • Flip laptop over so that the back is facing upward.

    • Push switch to the right.

    • Pull battery away from the laptop.

  2. Use a #0 Phillips head screw driver to remove all of the screws.
    • Use a #0 Phillips head screw driver to remove all of the screws.

  3. Flip laptop back over.
    • Flip laptop back over.

    • Open the laptop.

    • Wedge a prying tool between the keyboard and laptop body seam to remove keyboard.

    • Be careful not to bend the keyboard too much or break the tabs that connect the keyboard to the laptop.

  4. Gently lift keyboard.
    • Gently lift keyboard.

    • Disconnect keyboard from the laptop.

  5. Use a prying tool to remove the upper cover.
    • Use a prying tool to remove the upper cover.

  6. Locate the hard drive.
    • Locate the hard drive.

    • Lift the hard drive.

    • Disconnect hard drive.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Joe Niu

Üyelik tarihi: 20-09-2017

580 İtibar

5 adet Kılavuz yazıldı

0 Comments

Yorum Ekle

İstatistikleri Görüntüle:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 3

Her zaman: 139