Eşyalarını Tamir Et Topluluk Mağaza

Acer Chromebook C740-C4PE Heatsink Replacement

Giriş

This guide will demonstrate how to partially take apart the Acer Chromebook C740-C4PE, in addition to removing the heatsink.

Neye ihtiyacın var

  1. Acer Chromebook C740-C4PE Heatsink Replacement, Heatsink: adım 1, 3 resimden 1. Acer Chromebook C740-C4PE Heatsink Replacement, Heatsink: adım 1, 3 resimden 2. Acer Chromebook C740-C4PE Heatsink Replacement, Heatsink: adım 1, 3 resimden 3.

    • Make sure the laptop is turned off and laid down on a flat surface.

    • Unscrew the thirteen 10mm screws on the back of the device using a Phillips #0 screwdriver.

    • Use the spudger or any other prying tool to pry the back plate off of the device.

    • Be sure not to pry too hard as it may result in snapping the back plate.

    Düzenle

  2. Acer Chromebook C740-C4PE Heatsink Replacement: adım 2, 2 resimden 1. Acer Chromebook C740-C4PE Heatsink Replacement: adım 2, 2 resimden 2.

    • Remove the four 5mm screws on the heatsink using the Phillips #0 screwdriver.

    Düzenle

  3. Acer Chromebook C740-C4PE Heatsink Replacement: adım 3, 2 resimden 1. Acer Chromebook C740-C4PE Heatsink Replacement: adım 3, 2 resimden 2.

    • Loosen the two Phillips-head screws on the fan attached to the heatsink.

    Düzenle

  5. Acer Chromebook C740-C4PE Heatsink Replacement: adım 4, 1 resimden 1.

    • Detach the two antennae cables from the WiFi card by gently pulling on them.

    Düzenle

  6. Acer Chromebook C740-C4PE Heatsink Replacement: adım 5, 1 resimden 1.

    • Gently pull the fan cable out of the motherboard.

    • Pulling too hard may break the wires or the connector itself.

    Düzenle

  7. Acer Chromebook C740-C4PE Heatsink Replacement: adım 6, 1 resimden 1.

    • Remove the cable routed through the fan.

    • Do not completely remove the cables as they are attached to the motherboard. Once they are no longer routed in the fan, leave them as they are.

    Düzenle

  8. Acer Chromebook C740-C4PE Heatsink Replacement: adım 7, 1 resimden 1.

    • Remove the heatsink from the motherboard.

    • Before changing the heatsink/fan, you must clean off the thermal paste from the CPU and apply new thermal paste.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Yazar

1 tane daha katılımcı ile

Dylan Tocci

Üyelik tarihi: 10/17/17

237 İtibar

2 adet Kılavuz yazıldı

Rozetler: 6

+3 tane daha rozet

Ekip

UMass Dartmouth, Team S6-G4, Rockett Fall 2017 UMass Dartmouth, Team S6-G4, Rockett Fall 2017 üyesi

UMASSD-ROCKETT-F17S6G4

3 Üyeler

12 adet Kılavuz yazıldı

Bir Yorum

What type of thermal paste is best used?

Tracey Arria - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 6

Her zaman: 349