Ana içeriğe geç

Giriş

If the screen on your Acer Iconia model B1-710 tablet is not working or is damaged, use this guide to help you replace the screen. If the screen is shattered, please use caution when first handling the device as glass shards may be present. Before you begin, make sure the device is not connected to any charging ports and is powered off.

  1. Open the back cover by prying the casing off with an opening tool. Be careful to not pull pieces apart aggressively. There is a wire that could break. Be careful to not pull pieces apart aggressively. There is a wire that could break.
    • Open the back cover by prying the casing off with an opening tool.

    • Be careful to not pull pieces apart aggressively. There is a wire that could break.

  2. Unplug the battery from the motherboard. Unplug the battery from the motherboard. Unplug the battery from the motherboard.
    • Unplug the battery from the motherboard.

  3. Remove the battery.
    • Remove the battery.

    • The battery is lightly glued in, so there may be some difficulty getting it out.

  4. Unscrew all five 3 mm #000 Phillips screws. Unscrew all five 3 mm #000 Phillips screws.
    • Unscrew all five 3 mm #000 Phillips screws.

  5. Unplug the LCD ribbon. Unplug the LCD ribbon.
    • Unplug the LCD ribbon.

  6. Unplug the orange ribbon. Unplug the orange ribbon.
    • Unplug the orange ribbon.

  7. Unplug the white wire from the motherboard. Unplug the black wire from the motherboard. Unplug the black wire from the motherboard.
    • Unplug the white wire from the motherboard.

    • Unplug the black wire from the motherboard.

  8. Pull the motherboard off of the tablet.
    • Pull the motherboard off of the tablet.

  9. Use a blow dryer to melt the glue holding the LCD display in place.
    • Use a blow dryer to melt the glue holding the LCD display in place.

    • Patience is key. It will take a few minutes to melt the glue.

  10. Peel the LCD display. This piece is fragile and needs to be peeled with care. Parts may be hot.
    • Peel the LCD display.

    • This piece is fragile and needs to be peeled with care.

    • Parts may be hot.

  11. Use a blow dryer to melt the glue from the thin metal frame.
    • Use a blow dryer to melt the glue from the thin metal frame.

    • This piece is metal and will become hot during this process.

  12. Peel off the thin metal frame. Be careful not to bend the frame as it is very thin.
    • Peel off the thin metal frame.

    • Be careful not to bend the frame as it is very thin.

  13. Use a blow dryer to melt the glue between the metal frame and the screen.
    • Use a blow dryer to melt the glue between the metal frame and the screen.

    • The frame will get hot.

  14. Peel the frame from the screen. Be careful when peeling the screen or it may sustain further damage.
    • Peel the frame from the screen.

    • Be careful when peeling the screen or it may sustain further damage.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Ryan Weber

Üyelik tarihi: 26-03-2017

358 İtibar

3 adet Kılavuz yazıldı

Takım

IUPUI, Team S3-G5, Baechle Spring 2017 IUPUI, Team S3-G5, Baechle Spring 2017 üyesi

IUPUI-BAECHLE-S17S3G5

4 Üyeler

3 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 1

Her zaman: 704