Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

Giriş

A set of step-by-step instructions on how to remove, and replace the camera on your Acer Iconia B1-710 tablet.

  1. Open the back cover by prying the casing off. Be careful to not pull pieces apart aggressively. There is a wire that could break. Be careful to not pull pieces apart aggressively. There is a wire that could break.
    • Open the back cover by prying the casing off.

    • Be careful to not pull pieces apart aggressively. There is a wire that could break.

  2. Unplug the battery from the motherboard. Unplug the battery from the motherboard. Unplug the battery from the motherboard.
    • Unplug the battery from the motherboard.

  3. Remove the battery.
    • Remove the battery.

    • The battery is lightly glued in, so there may be some difficulty getting it out.

  4. Remove the five 3mm Phillips #000 screws. Keep the removed screws in a safe place so they can be used later.
    • Remove the five 3mm Phillips #000 screws.

    • Keep the removed screws in a safe place so they can be used later.

  5. Unplug the LCD by lifting the LCD plug from the white board. If you are having difficulty removing the LCD plug, use the metal spudger to gently lift the LCD plug.
    • Unplug the LCD by lifting the LCD plug from the white board.

    • If you are having difficulty removing the LCD plug, use the metal spudger to gently lift the LCD plug.

    • If you are using a sharp object to lift the LCD plug, point the sharp object away from you to prevent any injuries.

  6. Unplug the orange strip from the motherboard by lifting it. The orange strip is delicate, be careful when unplugging it and make sure it doesn't tear.
    • Unplug the orange strip from the motherboard by lifting it.

    • The orange strip is delicate, be careful when unplugging it and make sure it doesn't tear.

  7. Unplug the white wire. Unplug the black wire. Unplug the black wire.
    • Unplug the white wire.

    • Unplug the black wire.

  8. Remove the motherboard.
    • Remove the motherboard.

  9. Remove the camera from the motherboard with the metal spudger. Be careful not to damage the camera plug in, it is very delicate. Be careful not to damage the camera plug in, it is very delicate.
    • Remove the camera from the motherboard with the metal spudger.

    • Be careful not to damage the camera plug in, it is very delicate.

    • Place the new camera into the plug.

    • Follow the previous steps in reverse order to reinstall the camera.

Sonuç

Replacing the camera on an Acer Iconia B1-710 is a moderately difficult procedure, but with an understanding of the steps presented in this guide, this replacement can be done in a relatively short amount of time.

Bir başkası bu kılavuzu tamamladı.

Ryan Weber

Üyelik tarihi: 26-03-2017

358 İtibar

3 adet Kılavuz yazıldı

Takım

IUPUI, Team S3-G5, Baechle Spring 2017 IUPUI, Team S3-G5, Baechle Spring 2017 üyesi

IUPUI-BAECHLE-S17S3G5

4 Üyeler

3 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 2

Her zaman: 213