Ana içeriğe geç

Giriş

This guide will provide a set of step-by-step instructions on how to remove and replace the camera on your Acer Iconia B1-710 tablet.

In the event that your camera scratches, breaks, or malfunctions, this guide can help assist you to remove and replace the camera on your Acer Iconia B1-710 tablet.

Be careful, this is a fragile device.

Parçalar

Hiçbir parça belirtilmedi.

  1. Open the back cover by prying the casing off with an opening tool. Be careful to not pull pieces apart aggressively. There is a wire that could break. Be careful to not pull pieces apart aggressively. There is a wire that could break.
    • Open the back cover by prying the casing off with an opening tool.

    • Be careful to not pull pieces apart aggressively. There is a wire that could break.

  2. Unplug the battery from the motherboard. Unplug the battery from the motherboard. Unplug the battery from the motherboard.
    • Unplug the battery from the motherboard.

  3. Remove the battery.
    • Remove the battery.

    • The battery is lightly glued in, so there may be some difficulty getting it out.

  4. Remove the five 3mm Phillips #000 screws. The location of the screws are shown in the above picture, circled in red. Keep the removed screws in a safe place so they can be used later.
    • Remove the five 3mm Phillips #000 screws. The location of the screws are shown in the above picture, circled in red.

    • Keep the removed screws in a safe place so they can be used later.

  5. Unplug the LCD by lifting the LCD plug from the white board. The location of the LCD plug is shown in the above picture, circled in red. If you are having difficulty removing the LCD plug, use a spudger to gently lift it.
    • Unplug the LCD by lifting the LCD plug from the white board. The location of the LCD plug is shown in the above picture, circled in red.

    • If you are having difficulty removing the LCD plug, use a spudger to gently lift it.

  6. Next, unplug the orange strip from the motherboard by gently lifting it. The location of the orange strip is shown in the above picture, circled in red. The orange strip is delicate; be careful when unplugging it and make sure it doesn't tear.
    • Next, unplug the orange strip from the motherboard by gently lifting it. The location of the orange strip is shown in the above picture, circled in red.

    • The orange strip is delicate; be careful when unplugging it and make sure it doesn't tear.

  7. Unplug the white wire, shown above, circled in red. Unplug the black wire, shown above, circled in orange. Unplug the black wire, shown above, circled in orange.
    • Unplug the white wire, shown above, circled in red.

    • Unplug the black wire, shown above, circled in orange.

  8. Gently, remove the motherboard by carefully lifting it.
    • Gently, remove the motherboard by carefully lifting it.

  9. Remove the camera from the motherboard with the spudger. Be careful not to damage the camera plug; it is very delicate. Be careful not to damage the camera plug; it is very delicate.
    • Remove the camera from the motherboard with the spudger.

    • Be careful not to damage the camera plug; it is very delicate.

Sonuç

To reassemble your device, follow the above instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Ryan Weber

Üyelik tarihi: 26-03-2017

358 İtibar

3 adet Kılavuz yazıldı

Takım

IUPUI, Team S3-G5, Baechle Spring 2017 IUPUI, Team S3-G5, Baechle Spring 2017 üyesi

IUPUI-BAECHLE-S17S3G5

4 Üyeler

3 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 274