Ana içeriğe geç

Acer Iconia Tab A501 Speaker Replacement

Neye ihtiyacın var

  1. Acer Iconia Tab A501 Speaker Replacement, Back Cover: adım 1, 3 resimden 1. Acer Iconia Tab A501 Speaker Replacement, Back Cover: adım 1, 3 resimden 2. Acer Iconia Tab A501 Speaker Replacement, Back Cover: adım 1, 3 resimden 3.
    • Turn off your device before opening it.

    • Use a plastic opening tool to carefully separate the back cover, starting at the volume buttons.

    • Continue separating the back cover along the short side closest to the camera and around the device.

  2. Acer Iconia Tab A501 Speaker Replacement: adım 2, 1 resimden 1.
    • When separated enough, a little more than halfway around the device, the back cover will be easy to take off.

  3. Acer Iconia Tab A501 Speaker Replacement, Speaker: adım 3, 3 resimden 1. Acer Iconia Tab A501 Speaker Replacement, Speaker: adım 3, 3 resimden 2. Acer Iconia Tab A501 Speaker Replacement, Speaker: adım 3, 3 resimden 3.
    Bu adımda kullanılan alet:
    Tweezers
    $3.99
    Satın Al
    • In the next step, be careful not to squeeze too hard or scratch the motherboard.

    • Use the angled tweezers to disconnect the white motherboard-battery connector in the middle of the side opposite the docking port.

  4. Acer Iconia Tab A501 Speaker Replacement: adım 4, 3 resimden 1. Acer Iconia Tab A501 Speaker Replacement: adım 4, 3 resimden 2. Acer Iconia Tab A501 Speaker Replacement: adım 4, 3 resimden 3.
    • In this step, be careful not to squeeze too hard or scratch the motherboard.

    • Use the angled tweezers to disconnect the cable with red, white and green wires from the beige connector slightly toward the side with the Micro-HDMI port relative to the docking port.

  5. Acer Iconia Tab A501 Speaker Replacement: adım 5, 3 resimden 1. Acer Iconia Tab A501 Speaker Replacement: adım 5, 3 resimden 2. Acer Iconia Tab A501 Speaker Replacement: adım 5, 3 resimden 3.
    • Unscrew the 3.0 mm Phillips head screw on each speaker using a Phillips #1 screwdriver.

    • Unscrew the 4.0 mm Phillips head screw on each speaker using a Phillips #1 screwdriver.

  6. Acer Iconia Tab A501 Speaker Replacement: adım 6, 3 resimden 1. Acer Iconia Tab A501 Speaker Replacement: adım 6, 3 resimden 2. Acer Iconia Tab A501 Speaker Replacement: adım 6, 3 resimden 3.
    • Remove the speakers.

Sonuç

To reassemble your device, follow these instructions in reverse order.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 1

Son 30 gün: 3

Her zaman: 124