Ana içeriğe geç

Giriş

The keyboard dock and ribbon will be removed in this guide.

Parçalar

Hiçbir parça belirtilmedi.

  1. Power off the device and make sure it is disconnected from any external devices. Use a plastic opening tool to create a gap between the front and back casing of the device.
    • Power off the device and make sure it is disconnected from any external devices.

    • Use a plastic opening tool to create a gap between the front and back casing of the device.

    • Slowly maneuver the plastic tool around the entire perimeter of the tablet to separate the front and back.

  2. Set the device screen side down and remove the back casing.
    • Set the device screen side down and remove the back casing.

  3. iPhone Pil Tamir Setleri

    Only $29.99

    Buy Now

    iPhone Pil Tamir Setleri

    Only $29.99

    Buy Now
  4. Flip the latch and carefully pull the ribbon free. Flip the latch and carefully pull the ribbon free. Flip the latch and carefully pull the ribbon free.
    • Flip the latch and carefully pull the ribbon free.

  5. Remove the two screws holding the dock in place using a Phillips #0 screwdriver. Pull the dock out and slide it out of the device.
    • Remove the two screws holding the dock in place using a Phillips #0 screwdriver.

    • Pull the dock out and slide it out of the device.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Trey Wintzinger

Üyelik tarihi: 04-09-2018

587 İtibar

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 Gün: 7

Son 30 Gün: 28

Her zaman: 132