Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

Giriş

If your Acer TravelMate P653-V-6882’s keyboard is still not responding after restarting the device and/or updating the keyboard drivers, then your keyboard may need to be replaced or reconnected.

Here is the guide on how to replace the TravelMate’s keyboard.

  1. Turn the computer over so the base is facing up. Slide the battery lock to unlock position.
    • Turn the computer over so the base is facing up.

    • Slide the battery lock to unlock position.

  2. Slide the battery release latch to the right.
    • Slide the battery release latch to the right.

    • The battery pack will pop out.

  3. Lift the battery up.
    • Lift the battery up.

    • Pull out the battery.

  4. Remove the five 7mm Phillips #1 screws.
    • Remove the five 7mm Phillips #1 screws.

  5. Use the opening tool to separate base door from the bottom of the laptop.
    • Use the opening tool to separate base door from the bottom of the laptop.

    • Be careful not to bend or crack the plastic back cover.

  6. Gently pry open the base door by pushing up. Pull out the base door.
    • Gently pry open the base door by pushing up.

    • Pull out the base door.

    • Be careful not to bend or crack the plastic back cover.

  7. Remove the two 7mm Phillips #1 screws.
    • Remove the two 7mm Phillips #1 screws.

  8. Flip the laptop so that the underside is now facing the bottom.
    • Flip the laptop so that the underside is now facing the bottom.

    • Open the LCD panel.

    • Use the flat end of a spudger to push in the six latches.

    • Be careful not to bend or crack the keyboard.

  9. When the latches are pushed in, the keyboard will pop out.
    • When the latches are pushed in, the keyboard will pop out.

    • Gently pry up the keyboard.

    • Be careful not to bend or crack the keyboard.

  10. Slide the keyboard forward to access the keyboard cable.
    • Slide the keyboard forward to access the keyboard cable.

    • Flip the connector latch up to open it.

    • Pull out the keyboard cable gently.

    • Be careful not to damage the connector.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Daniel Popovic

Üyelik tarihi: 13-01-2020

961 İtibar

7 adet Kılavuz yazıldı

Takım

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 2

Her zaman: 67