Eşyalarını Tamir Et Topluluk Mağaza

Aiptek DZO-V58N Lens Protector Replacement

Giriş

The lens protector is a plastic cover that protects the lens from scratches, dirt and other debris. Use this guide to replace the lens protector.

Neye ihtiyacın var

  1. Aiptek DZO-V58N Lens Protector Replacement, Battery: adım 1, 1 resimden 1.

    • Locate the battery compartment on the back of the camera. It is the panel with the plastic ridges for simple removal.

    • Slide the battery compartment cover down off of the camera body.

    Düzenle

  2. Aiptek DZO-V58N Lens Protector Replacement: adım 2, 1 resimden 1.

    • Pry up the battery from the bottom using a finger and remove the batter from the case.

    Düzenle

  3. Aiptek DZO-V58N Lens Protector Replacement, Lens Protector: adım 3, 1 resimden 1.

    • Remove the lanyard by pulling the grey lace through the black string loop.

    • Pull black string loop through the silver bracket.

    Düzenle

  4. Aiptek DZO-V58N Lens Protector Replacement: adım 4, 1 resimden 1.

    • Use a plastic opening tool to pry off the black control cover.

    • The face plates are glued, so use force to pry the face plates from the camera body.

    Düzenle

  6. Aiptek DZO-V58N Lens Protector Replacement: adım 5, 1 resimden 1.

    • Use a plastic opening tool to pry off the ridged back face plate and the black button.

    • The face plates are glued, so use force to pry the face plates from the camera body.

    • The button is loose and should come off with little or no effort.

    Düzenle

  7. Aiptek DZO-V58N Lens Protector Replacement: adım 6, 1 resimden 1.

    • Use a plastic opening tool to pry off the silver face plate.

    • The face plates are glued, so use force to pry the face plates from the camera body.

    Düzenle

  8. Aiptek DZO-V58N Lens Protector Replacement: adım 7, 3 resimden 1. Aiptek DZO-V58N Lens Protector Replacement: adım 7, 3 resimden 2. Aiptek DZO-V58N Lens Protector Replacement: adım 7, 3 resimden 3.

    • Open the USB cover to expose the small machine screw.

    • Use the Phillips #00 screwdriver to unscrew the six 0.5cm machine case screws (distributed around the camera body).

    • These small screws are easy to lose. Place the removed screws in an organized container to avoid losing them.

    Düzenle

  9. Aiptek DZO-V58N Lens Protector Replacement: adım 8, 1 resimden 1.

    • Pull off the side control panel.

    Düzenle

  10. Aiptek DZO-V58N Lens Protector Replacement: adım 9, 2 resimden 1. Aiptek DZO-V58N Lens Protector Replacement: adım 9, 2 resimden 2.

    • Flip open the screen by pulling the loose end of the screen away from the case.

    • Use tweezers to remove the two outside rubber dots to reveal the two 0.5cm machine screws.

    • Use the #00 Phillips Screwdriver to remove both screws.

    Düzenle

  11. Aiptek DZO-V58N Lens Protector Replacement: adım 10, 2 resimden 1. Aiptek DZO-V58N Lens Protector Replacement: adım 10, 2 resimden 2.

    • Pull the body apart from the bottom of device just enough to make space to remove the silver plastic strap holder.

    • Use tweezers to remove the silver plastic strap holder.

    • Use a plastic opening tool to pry off the lens protector.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

3 tane daha katılımcı ile

Zachary Yun

Üyelik tarihi: 04/03/12

7 İtibar

5 adet Kılavuz yazıldı

Rozetler: 4

+1 tane daha rozet

Ekip

Cal Poly, Team 5-5, Forte Spring 2012 Cal Poly, Team 5-5, Forte Spring 2012 üyesi

CPSU-FORTE-S12S5G5

5 Üyeler

10 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 1

Her zaman: 554