Eşyalarını Tamir Et Topluluk Mağaza

Aiptek Pocket DVII 1.3M LCD Lens Assembly Replacement

Neye ihtiyacın var

  1. Aiptek Pocket DVII 1.3M LCD Lens Assembly Replacement, Lens Assembly: adım 1, 3 resimden 1. Aiptek Pocket DVII 1.3M LCD Lens Assembly Replacement, Lens Assembly: adım 1, 3 resimden 2. Aiptek Pocket DVII 1.3M LCD Lens Assembly Replacement, Lens Assembly: adım 1, 3 resimden 3.

    • Remove the battery cover.

    • Remove the batteries.

    Düzenle

  2. Aiptek Pocket DVII 1.3M LCD Lens Assembly Replacement: adım 2, 1 resimden 1.

    • Unscrew the three 4mm screws from the battery side of the device. Use a Phillips screw driver.

    Düzenle

  3. Aiptek Pocket DVII 1.3M LCD Lens Assembly Replacement: adım 3, 1 resimden 1.

    • Remove the four screws from the back side.

    Düzenle

  4. Aiptek Pocket DVII 1.3M LCD Lens Assembly Replacement: adım 4, 2 resimden 1. Aiptek Pocket DVII 1.3M LCD Lens Assembly Replacement: adım 4, 2 resimden 2.

    • Remove the sticky black dots.

    • Remove the hidden screw.

    Düzenle

  6. Aiptek Pocket DVII 1.3M LCD Lens Assembly Replacement: adım 5, 2 resimden 1. Aiptek Pocket DVII 1.3M LCD Lens Assembly Replacement: adım 5, 2 resimden 2.

    • Remove the two screws from the top side of the device.

    • Remove the two screws from the bottom side of the device.

    Düzenle

  7. Aiptek Pocket DVII 1.3M LCD Lens Assembly Replacement: adım 6, 1 resimden 1.

    • Remove the rear cover.

    • Be careful not to lose the spring inside.

    Düzenle

  8. Aiptek Pocket DVII 1.3M LCD Lens Assembly Replacement: adım 7, 1 resimden 1.

    • Pull back the front cover so that you can dislodge the side cover.

    Düzenle

  9. Aiptek Pocket DVII 1.3M LCD Lens Assembly Replacement: adım 8, 1 resimden 1.

    • Unfold the device and be careful not to tear the black and red power supply wires.

    Düzenle

  10. Aiptek Pocket DVII 1.3M LCD Lens Assembly Replacement: adım 9, 1 resimden 1.

    • Remove the four screws from the motherboard.

    Düzenle

  11. Aiptek Pocket DVII 1.3M LCD Lens Assembly Replacement: adım 10, 1 resimden 1.

    • Take out the motherboard while disconnecting the flip screen's cable from underneath.

    Düzenle

  12. Aiptek Pocket DVII 1.3M LCD Lens Assembly Replacement: adım 11, 1 resimden 1.

    • Replace the Lens Assembly board.

    • Be careful not to damage any of the pins. Pull the board linearly.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Yazar

1 tane daha katılımcı ile

Gyozo Aba Hivatal

Üyelik tarihi: 01/21/15

561 İtibar

5 adet Kılavuz yazıldı

Rozetler: 14

+11 tane daha rozet

Ekip

USF Tampa, Team 6-4, Brown Winter 2015 USF Tampa, Team 6-4, Brown Winter 2015 üyesi

USFT-BROWN-W15S6G4

3 Üyeler

10 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 5

Her zaman: 119