Ana içeriğe geç
  1. Locate the small indent on the lower left corner. Use your fingers or a small plastic opening tool to lift the back cover off. Use your fingers or a small plastic opening tool to lift the back cover off.
    • Locate the small indent on the lower left corner.

    • Use your fingers or a small plastic opening tool to lift the back cover off.

  2. Locate the indent between the battery and your phone. Use your finger or a small plastic opening tool to lift the battery free. Use your finger or a small plastic opening tool to lift the battery free.
    • Locate the indent between the battery and your phone.

    • Use your finger or a small plastic opening tool to lift the battery free.

  3. Using the Phillips screw driver, remove the 9 screws from the phone. Using the Phillips screw driver, remove the 9 screws from the phone. Using the Phillips screw driver, remove the 9 screws from the phone.
    • Using the Phillips screw driver, remove the 9 screws from the phone.

  4. Using your prying tool, place it between the screen and the back cover and pry it open.
    • Using your prying tool, place it between the screen and the back cover and pry it open.

  5. Apple Watch Kitleri

    Screen and battery repairs just got easier.

    Hemen Alışveriş Yapın

    Apple Watch Kitleri

    Screen and battery repairs just got easier.

    Hemen Alışveriş Yapın
  6. Disconnect the camera from the mother board with your prying tool. Disconnect the camera from the mother board with your prying tool.
    • Disconnect the camera from the mother board with your prying tool.

  7. Remove both of this cables located on the bottom left corner of the phone. Remove both of this cables located on the bottom left corner of the phone. Remove both of this cables located on the bottom left corner of the phone.
    • Remove both of this cables located on the bottom left corner of the phone.

  8. Remove the volume and power button using your prying tool. Go underneath the bronze plate with your prying tool and carefully pry it off.
    • Remove the volume and power button using your prying tool.

    • Go underneath the bronze plate with your prying tool and carefully pry it off.

  9. Remove this pice that is to the right of the camera with your prying tool.
    • Remove this pice that is to the right of the camera with your prying tool.

  10. Remove this two pieces by using your tweezers. Carefully pull them off. There will be a black flap where you can place your tweezers to pull.
    • Remove this two pieces by using your tweezers.

    • Carefully pull them off. There will be a black flap where you can place your tweezers to pull.

  11. Using you prying tool, go in-between the phone.
    • Using you prying tool, go in-between the phone.

    • Carefully pry it off.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Yahriel Negrete

Üyelik tarihi: 08-02-2018

291 İtibar

2 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 4

Her zaman: 111