Ana içeriğe geç

Giriş

In this guide, we will be showing you how to remove and replace the Base Panel.

Parçalar

Hiçbir parça belirtilmedi.

  1. Close the display and turn the computer over.
    • Close the display and turn the computer over.

    • Make sure PC is turned off!

  2. Loosen the captive screws that secure the base panel to the computer base.
    • Loosen the captive screws that secure the base panel to the computer base.

  3. Using a plastic scribe, gently release the tabs that secure the base panel to the computer base.
    • Using a plastic scribe, gently release the tabs that secure the base panel to the computer base.

  4. MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now

    MacBook Pil Tamir Setleri

    Başlangıç $69.99

    Buy Now
  5. Slide and remove the base panel from the computer base.
    • Slide and remove the base panel from the computer base.

  6. Disconnect the Battery cable from the system board.
    • Disconnect the Battery cable from the system board.

    • Turn the computer over.

    • Press and hold power button for 5 seconds to ground the system board.

  7. Connect the battery cable to the system board.
    • Connect the battery cable to the system board.

  8. Tighten the captive screws that secure the base panel to the computer base.
    • Tighten the captive screws that secure the base panel to the computer base.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Terrence15

Üyelik tarihi: 18-12-2017

70.993 İtibar

442 adet Kılavuz yazıldı

Takım

Informative Technologies Inc. Informative Technologies Inc. üyesi

Community

15 Üyeler

930 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 2

Son 30 Gün: 9

Her zaman: 250