Ana içeriğe geç

Giriş

This guide will show how to replace a faulty cooling fan which can cause the computer overheating.

Parçalar

Hiçbir parça belirtilmedi.

  1. Unscrew the two 4mm screws from the plastic covering. Pull the plastic cover up and slide off.
    • Unscrew the two 4mm screws from the plastic covering.

    • Pull the plastic cover up and slide off.

  2. Look for the yellow tab inside the computer. Disconnect the black wire with the yellow tab. This disconnects the battery.
    • Look for the yellow tab inside the computer.

    • Disconnect the black wire with the yellow tab.

    • This disconnects the battery.

  3. Disconnect the rest of the cables from the motherboard.
    • Disconnect the rest of the cables from the motherboard.

  4. Remove all sixteen of the screws on the underside of the laptop. Eight 2.5mm x 8mm Six 2.5mm x 10mm
    • Remove all sixteen of the screws on the underside of the laptop.

    • Eight 2.5mm x 8mm

    • Six 2.5mm x 10mm

    • Two 2.5mm x 18mm

  5. Gently, separate and remove the plastic palm rest.
    • Gently, separate and remove the plastic palm rest.

  6. Gently, disconnect the fan cable.
    • Gently, disconnect the fan cable.

  7. Unscrew and remove the two 5mm screws. Finally, remove the fan from the rest of the laptop.
    • Unscrew and remove the two 5mm screws.

    • Finally, remove the fan from the rest of the laptop.

Sonuç

To reassemble your device, follow these instructions in reverse order.

3 farklı kişi bu kılavuzu tamamladı.

Luis Garcia

Üyelik tarihi: 20-09-2017

402 İtibar

4 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 6

Son 30 gün: 26

Her zaman: 2,069