Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

Giriş

How to remove and replace the Base Cover.

Parçalar

Hiçbir parça belirtilmedi.

  1. WARNING: Before working inside your computer, read the safety information that shipped with your computer.
    • WARNING: Before working inside your computer, read the safety information that shipped with your computer.

    • CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as a connector on your computer).

    • Turn the computer over.

  2. Loosen the eight captive screws that secure the base cover to the computer base.
    • Loosen the eight captive screws that secure the base cover to the computer base.

  3. Lift the base cover off the computer base.
    • Lift the base cover off the computer base.

  4. Align the tabs on the NEW base cover with the slots on the computer base and place the base cover in position.
    • Align the tabs on the NEW base cover with the slots on the computer base and place the base cover in position.

  5. Tighten the eight screws that secure the base cover to the computer base.
    • Tighten the eight screws that secure the base cover to the computer base.

Bitiş Çizgisi

2 farklı kişi bu kılavuzu tamamladı.

darrius

Üyelik tarihi: 26-03-2018

5.129 İtibar

30 adet Kılavuz yazıldı

Takım

Informative Technologies Inc. Informative Technologies Inc. üyesi

Community

33 Üyeler

1.967 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 105