Ana içeriğe geç

Giriş

Use this guide for help on removing the compartment door. This is necessary for other replacement guides such as the GPU and the hard drive.

Parçalar

Hiçbir parça belirtilmedi.

  1. Remove the battery by sliding the latch to the left and pulling the battery up. Remove the battery by sliding the latch to the left and pulling the battery up. Remove the battery by sliding the latch to the left and pulling the battery up.
    • Remove the battery by sliding the latch to the left and pulling the battery up.

  2. Remove the two 4-mm screws that hold the compartment door to the rest of the computer using a PH#0 screwdriver tip. Remove the two 4-mm screws that hold the compartment door to the rest of the computer using a PH#0 screwdriver tip.
    • Remove the two 4-mm screws that hold the compartment door to the rest of the computer using a PH#0 screwdriver tip.

  3. Slide the compartment door towards the front of the computer and lift. Slide the compartment door towards the front of the computer and lift. Slide the compartment door towards the front of the computer and lift.
    • Slide the compartment door towards the front of the computer and lift.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Jake Alexander

Üyelik tarihi: 22-01-2018

85 İtibar

1 Kılavuz yazıldı

Takım

Cal Poly, Team S11-G3, Banghart Winter 2018 Cal Poly, Team S11-G3, Banghart Winter 2018 üyesi

CPSU-BANGHART-W18S11G3

5 Üyeler

6 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 3

Her zaman: 219