Giriş

Upgrade your hard drive for more storage space.

  1. First, take off the battery by moving the latch to the left and pulling it up.
    • First, take off the battery by moving the latch to the left and pulling it up.

    Yorum Ekle

  2. Then unscrew the two Phillips screws.
    • Then unscrew the two Phillips screws.

    • Pull the cover down, then up, revealing the internals

    Yorum Ekle

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Unscrew the four screws indicated

    • Pull on the tab that says "Pull" and remove the Hard Drive

    Yorum Ekle

    • With even pressure on both sides, take off the SATA converter and then connect it to the drive you would like to replace it with.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

7 başka kişi bu kılavuzu tamamladı.

Gabe

Üyelik tarihi: 09-04-2010

8.033 İtibar

3 adet Kılavuz yazıldı

Takım

Master Techs Master Techs üyesi

Community

279 Üyeler

758 adet Kılavuz yazıldı

Bir Yorum

Thanks, great guide. Was a bit confused between steps three and four but I simply had to remove the metal casing around the hard drive.

Hasan - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 Gün: 16

Son 30 Gün: 83

Her zaman: 30,994