Ana içeriğe geç

Bu sürüm, hatalı düzenlemeler içerebilir. En son doğrulanmış bellek kopyası dönün.

Neye ihtiyacın var

  1. Bu adım çevrilmemiş. Çevrilmesine yardım edin

    : adım 1, 1 resimden 1.
    • WARNING: Before working inside your computer, read the safety information that shipped with your computer.

    • Turn the computer over.

  2. Bu adım çevrilmemiş. Çevrilmesine yardım edin

    : adım 2, 1 resimden 1.
    • Slide the battery latch to the unlock position as shown.

  3. Bu adım çevrilmemiş. Çevrilmesine yardım edin

    : adım 3, 1 resimden 1.
    • After the Battery Pack pops up, remove the Battery Pack.

  4. Bu adım çevrilmemiş. Çevrilmesine yardım edin

    : adım 4, 1 resimden 1.
    • Align the battery pack tabs with the slots in the battery bay.

  5. Bu adım çevrilmemiş. Çevrilmesine yardım edin

    : adım 5, 1 resimden 1.
    • Push the NEW battery pack into the battery bay until the battery pack clicks into place.

  6. Bu adım çevrilmemiş. Çevrilmesine yardım edin

    : adım 6, 1 resimden 1.
    • WARNING: Before working inside your computer, read the safety information that shipped with your computer.

    • WARNING: If you remove the hard drive from the computer when the drive is hot, do not touch the metal housing of the hard drive.

    • Loosen the four captive screws that secure the hard-drive assembly.

  7. Bu adım çevrilmemiş. Çevrilmesine yardım edin

    : adım 7, 1 resimden 1.
    • Using the pull-tab, lift the hard-drive assembly out of the hard-drive bay.

  8. Bu adım çevrilmemiş. Çevrilmesine yardım edin

    : adım 8, 1 resimden 1.
    • Remove the four screws that secure the hard drive to the hard-drive bracket.

  9. Bu adım çevrilmemiş. Çevrilmesine yardım edin

    : adım 9, 2 resimden 1. : adım 9, 2 resimden 2.
    • Lift the hard drive out of the hard-drive bracket.

  10. Bu adım çevrilmemiş. Çevrilmesine yardım edin

    : adım 10, 2 resimden 1. : adım 10, 2 resimden 2.
    • Disconnect the interposer from the hard drive.

  11. Bu adım çevrilmemiş. Çevrilmesine yardım edin

    : adım 11, 2 resimden 1. : adım 11, 2 resimden 2.
    • Connect the interposer to the NEW hard drive.

  12. Bu adım çevrilmemiş. Çevrilmesine yardım edin

    : adım 12, 2 resimden 1. : adım 12, 2 resimden 2.
    • Place the hard drive in the hard-drive bracket.

  13. Bu adım çevrilmemiş. Çevrilmesine yardım edin

    : adım 13, 1 resimden 1.
    • Replace the four screws that secure the hard drive to the hard-drive bracket.

  14. Bu adım çevrilmemiş. Çevrilmesine yardım edin

    : adım 14, 1 resimden 1.
    • Place the hard-drive assembly in the hard-drive bay.

  15. Bu adım çevrilmemiş. Çevrilmesine yardım edin

    : adım 15, 1 resimden 1.
    • Align and tighten the four captive screws that secure the hard-drive assembly to the hard-drive bay.

Bitiş Çizgisi

Terrence15

Üyelik tarihi: 12/18/17

79.034 İtibar

441 adet Kılavuz yazıldı

Ekip

RampUP America, Inc. RampUP America, Inc. üyesi

Community

42 Üyeler

1.985 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 2

Her zaman: 480