Ana içeriğe geç

Giriş

In this guide, we will be showing you how to remove and replace the Optical Drive.

Parçalar

Hiçbir parça belirtilmedi.

  1. WARNING: Before working inside your computer, read the safety  information that shipped with your computer.
    • WARNING: Before working inside your computer, read the safety information that shipped with your computer.

    • WARNING: Before performing these procedures, turn off the computer, disconnect the AC adapter from the electrical outlet and the computer, disconnect the modem from the wall connector and the computer, and remove any other external cables from the computer.

    • Remove the screw that secures the optical drive to the computer base.

  2. Make sure the Center Control Center, Keyboard, Palm Rest, Display Assembly, Magnesium Cover and Input/Output Board is removed.
    • Make sure the Center Control Center, Keyboard, Palm Rest, Display Assembly, Magnesium Cover and Input/Output Board is removed.

    • Remove the three screws that secure the optical drive to the computer base.

  3. Lift the optical drive out of the computer.
    • Lift the optical drive out of the computer.

    • Remove the five screws that secure the optical drive to the optical-drive bracket and lift the optical-drive bracket out.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Terrence15

Üyelik tarihi: 18-12-2017

73.105 İtibar

442 adet Kılavuz yazıldı

Takım

Informative Technologies Inc. Informative Technologies Inc. üyesi

Community

38 Üyeler

1.990 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 13

Her zaman: 649