Ana içeriğe geç

Alienware m15 R6 Base Cover Replacement

Neye ihtiyacın var

  1. Alienware m15 R6 Base Cover Replacement, Base Cover: adım 1, 1 resimden 1.
    • Remove the two screws (M2.5x5) that secure the base cover to the palm-rest and keyboard assembly.

    • New line. Loosen the two captive screws (M2.5x8.5+3.5) that secure the base cover to the palm-rest and keyboard assembly

    • Loosen the four captive screws (M2.5x1.7+3.3) that secure the base cover to the palm-rest and keyboard assembly.

  2. Alienware m15 R6 Base Cover Replacement: adım 2, 1 resimden 1.
    • Using your fingertips, pry open the base cover from the middle of the front edge of base cover, and then pry the left and right sides of the base cover.

    • Lift the base cover off the palm-rest and keyboard assembly.

  3. Alienware m15 R6 Base Cover Replacement: adım 3, 1 resimden 1.
    • Disconnect the battery cable from the system board.

    • Turn your computer over and press the power button for 20 seconds to drain the flea power

Sonuç

To reassemble your device, follow these instructions in reverse order.

Andrzej

Üyelik tarihi: 02/17/23

1.672 İtibar

18 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 8

Son 30 gün: 20

Her zaman: 240