Eşyalarını Tamir Et Topluluk Mağaza

Altec Lansing BoomJacket 2 Battery Replacement

Giriş

If your BoomJacket 2 loses charge rapidly, or fails to charge at all consider replacing the battery.

Neye ihtiyacın var

  1. Altec Lansing BoomJacket 2 Battery Replacement, Altec Lansing BoomJacket 2 Disassembly: adım 1, 2 resimden 1. Altec Lansing BoomJacket 2 Battery Replacement, Altec Lansing BoomJacket 2 Disassembly: adım 1, 2 resimden 2.

    • Starting from any side, use your fingers to grab the black rubber sleeve and gently pull away from the speaker on both sides.

    Düzenle

  2. Altec Lansing BoomJacket 2 Battery Replacement: adım 2, 2 resimden 1. Altec Lansing BoomJacket 2 Battery Replacement: adım 2, 2 resimden 2.

    • Using your fingers, grab the blue sleeve from one side and pull away from the unit.

    Düzenle

  3. Altec Lansing BoomJacket 2 Battery Replacement: adım 3, 1 resimden 1.

    • At each of the marked pry spots, use the metal spudger to lift the speaker grill away from the case.

    • Avoid using excessive force to prevent bending the grill.

    Düzenle

  5. Altec Lansing BoomJacket 2 Battery Replacement: adım 4, 2 resimden 1. Altec Lansing BoomJacket 2 Battery Replacement: adım 4, 2 resimden 2.

    • Use the tweezers to remove the six rubber stoppers. There are four in the middle and two on the sides.

    Düzenle

  6. Altec Lansing BoomJacket 2 Battery Replacement: adım 5, 1 resimden 1.

    • Use the PH1 Phillips screwdriver to remove the six 12mm screws that lie underneath each rubber stopper.

    Düzenle

  7. Altec Lansing BoomJacket 2 Battery Replacement: adım 6, 1 resimden 1.

    • Gently pull apart the front panel from the base of the speaker.

    Düzenle

  8. Altec Lansing BoomJacket 2 Battery Replacement, Battery: adım 7, 1 resimden 1.

    • The battery will be in the middle of the speaker when the case is open.

    Düzenle

  9. Altec Lansing BoomJacket 2 Battery Replacement: adım 8, 1 resimden 1.

    • Pull firmly from both sides of the pin to disconnect the battery cable from the motherboard.

    • Pull battery up and away from speaker without catching any other components.

    • Motherboards have fragile components and can easily be damaged if they are hit or pulled on while extracting other parts.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

Yazar

3 tane daha katılımcı ile

Zach Braaten

Üyelik tarihi: 07/12/18

516 İtibar

4 adet Kılavuz yazıldı

Rozetler: 8

+5 tane daha rozet

Ekip

UW Tacoma, Team S1-G4, Cardinal Summer 2018 UW Tacoma, Team S1-G4, Cardinal Summer 2018 üyesi

UWT-CARDINAL-SU18S1G4

4 Üyeler

4 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 7

Son 30 gün: 19

Her zaman: 1,476