Ana içeriğe geç

Altec Lansing BoomJacket 2 Disassembly

Neye ihtiyacın var

  1. Altec Lansing BoomJacket 2 Disassembly, Altec Lansing BoomJacket 2 Disassembly: adım 1, 2 resimden 1. Altec Lansing BoomJacket 2 Disassembly, Altec Lansing BoomJacket 2 Disassembly: adım 1, 2 resimden 2.
    • Starting from any side, use your fingers to grab the black rubber sleeve and gently pull away from the speaker on both sides.

  2. Altec Lansing BoomJacket 2 Disassembly: adım 2, 2 resimden 1. Altec Lansing BoomJacket 2 Disassembly: adım 2, 2 resimden 2.
    • Using your fingers, grab the blue sleeve from one side and pull away from the unit.

  3. Altec Lansing BoomJacket 2 Disassembly: adım 3, 1 resimden 1.
    • At each of the marked pry spots, use the metal spudger to lift the speaker grill away from the case.

    • Avoid using excessive force to prevent bending the grill.

  4. Altec Lansing BoomJacket 2 Disassembly: adım 4, 2 resimden 1. Altec Lansing BoomJacket 2 Disassembly: adım 4, 2 resimden 2.
    • Use the tweezers to remove the six rubber stoppers. There are four in the middle and two on the sides.

  5. Altec Lansing BoomJacket 2 Disassembly: adım 5, 1 resimden 1.
    • Use the PH1 Phillips screwdriver to remove the six 12mm screws that lie underneath each rubber stopper.

  6. Altec Lansing BoomJacket 2 Disassembly: adım 6, 1 resimden 1.
    • Gently pull apart the front panel from the base of the speaker.

Sonuç

To reassemble your device, follow these instructions in reverse order.

3 farklı kişi bu kılavuzu tamamladı.

Zach Braaten

Üyelik tarihi: 07/12/18

516 İtibar

4 adet Kılavuz yazıldı

Ekip

UW Tacoma, Team S1-G4, Cardinal Summer 2018 UW Tacoma, Team S1-G4, Cardinal Summer 2018 üyesi

UWT-CARDINAL-SU18S1G4

4 Üyeler

4 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 4

Son 30 gün: 28

Her zaman: 1,482