Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

Giriş

You will need to use the screen replacement guide as a prerequisite.

Parçalar

Hiçbir parça belirtilmedi.

  1. Avoid prying near bottom right hand side due to LCD Connector Use a plastic opening tool to pry the screen up in the right hand corner. Use a plastic opening tool to pry the screen up in the right hand corner.
    • Avoid prying near bottom right hand side due to LCD Connector

    • Use a plastic opening tool to pry the screen up in the right hand corner.

  2. Do not completely remove the screen yet as there is a ZIF connector connected.
    • Do not completely remove the screen yet as there is a ZIF connector connected.

    • Lift the screen and digitizer from the case.

    • You may need to use some force due to the glue.

  3. Be mindful of the ZIF connector. Disconnect the ribbon connector from the digitizer side using your hands or the plastic opening tool.
    • Be mindful of the ZIF connector.

    • Disconnect the ribbon connector from the digitizer side using your hands or the plastic opening tool.

  4. Nintendo Switch Kit'leri

    Oyuna geri dönmek için hızlı bir düzeltme

    Switch Kit'leri Satın Al

    Nintendo Switch Kit'leri

    Oyuna geri dönmek için hızlı bir düzeltme

    Switch Kit'leri Satın Al
  5. Remove the screen and digitizer from the case completely.
    • Remove the screen and digitizer from the case completely.

  6. Remove the single T5 Torx screw at the base of the camera. Once removed, place the screw aside in a safe location.
    • Remove the single T5 Torx screw at the base of the camera.

    • Once removed, place the screw aside in a safe location.

  7. Lift the camera from the case using the plastic opening tool. The camera is still connected to the motherboard via the ZIF connector.
    • Lift the camera from the case using the plastic opening tool.

    • The camera is still connected to the motherboard via the ZIF connector.

  8. Gently grab the camera and pull  to remove. The camera is now free from the motherboard.
    • Gently grab the camera and pull to remove.

    • The camera is now free from the motherboard.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Jaie Hillery

Üyelik tarihi: 07-10-2014

1.540 İtibar

10 adet Kılavuz yazıldı

Takım

USF Tampa, Team 16-6, Blackwell Winter 2016 USF Tampa, Team 16-6, Blackwell Winter 2016 üyesi

USFT-BLACKWELL-W16S16G6

3 Üyeler

15 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 4

Son 30 gün: 14

Her zaman: 539