Giriş
Use this guide to remove or replace the interlock assembly in a Clarke Floor Sander 07163A 2017.
Neye ihtiyacın var
-
-
Use a 3/16" hex key or driver bit to remove the six 23.4 mm-long screws holding the two halves of the handle enclosure together.
-
-
-
-
Pull the wires connected to the interlock assembly straight out of their connectors.
-
-
-
After all wires are disconnected from the interlock assembly, remove the interlock assembly from the handle.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
İptal et: Bu kılavuzu tamamlamadım.
Bir başkası bu kılavuzu tamamladı.