Anker SoundCore 2 Microphone Replacement

Giriş

This is a step by step guide on replacing the microphone in the Anker SoundCore 2 bluetooth speaker. You made need to replace the microphone if it no longer picks up sound. Take a look at the troubleshooting page to see if you need to replace the microphone. For this guide you will need a screwdriver and possibly glue.

Neye ihtiyacın var

Adım 1 Front Panel

Anker SoundCore 2 Microphone Replacement, Front Panel: adım 1, 2 resimden 1.

Anker SoundCore 2 Microphone Replacement, Front Panel: adım 1, 2 resimden 2.

Insert a spudger between the front panel and the body of the speaker.
Pry around the edges of the front panel with the spudger to pry it away from the speaker body.

Düzenle

Adım 2 Microphone

Anker SoundCore 2 Microphone Replacement, Microphone: adım 2, 3 resimden 1.

Anker SoundCore 2 Microphone Replacement, Microphone: adım 2, 3 resimden 2.

Anker SoundCore 2 Microphone Replacement, Microphone: adım 2, 3 resimden 3.

Remove eight 10 mm screws from the speaker mount using a Phillips #0 screwdriver.
Insert a spudger in the gap between the speaker mount and speaker body to remove the speaker mount.
Flip up the speaker mount panel from the speaker housing case.

Düzenle

Adım 3

Anker SoundCore 2 Microphone Replacement: adım 3, 3 resimden 3.

Disconnect the microphone wire from the motherboard.
Use a spudger to pry the microphone out of the speaker mount panel.
The microphone is held in place with glue, so you may need to re-glue the new microphone onto the speaker mount panel.