Eşyalarını Tamir Et Topluluk Mağaza
Onarım Topluluğuna Katılın - Hesap Oluşturun

Anker Soundcore Life Q20 Hinge Pin Replacement

Giriş

If you want to replace the hinge pins on your Anker Soundcore Life Q20 headphones, follow this guide. The hinge pins are located where the ear cushions connect to the headband. They allow the ear cushions to rotate and lay flat against the headband in order to have a more compact design. They are also used to adjust the headphones for different head sizes.

They are not crucial to the main function of the headphones but are important for adjusting the headphones for travel and comfort.

Neye ihtiyacın var

  1. Anker Soundcore Life Q20 Hinge Pin Replacement, Hinge Pin: adım 1, 1 resimden 1.

    • Using the Phillips #00 screwdriver, remove the two 10 mm screws from the connection between the band of the headphones and the base.

    Düzenle

  3. Anker Soundcore Life Q20 Hinge Pin Replacement: adım 2, 1 resimden 1.

    • Pull the band of the headphones away from the base to expose the hinge pin.

    Düzenle

  4. Anker Soundcore Life Q20 Hinge Pin Replacement: adım 3, 1 resimden 1.

    • Use a pin or another narrow tool to push the hinge pin out of place.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

0Kılavuz Yorumları

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 23

Son 30 gün: 89

Her zaman: 556