Remove the three 14.3mm T7 Torx screws from the bottom of AirPort.
  • Remove the three 14.3mm T7 Torx screws from the bottom of AirPort.

Yorum Ekle

Remove the 5.1mm Phillips screw from the bottom of the AirPort. This screw is located under the identification sticker. You will have to remove the sticker or make a hole to remove it.
  • Remove the 5.1mm Phillips screw from the bottom of the AirPort. This screw is located under the identification sticker. You will have to remove the sticker or make a hole to remove it.

Yorum Ekle

Lift the bottom and top casing straight apart and then lift metal casing straight up from the bottom plastic casing. Lift the bottom and top casing straight apart and then lift metal casing straight up from the bottom plastic casing.
  • Lift the bottom and top casing straight apart and then lift metal casing straight up from the bottom plastic casing.

Yorum Ekle

Unplug the black connector on the top of the metal casing by gently pulling horizontally.
  • Unplug the black connector on the top of the metal casing by gently pulling horizontally.

Yorum Ekle

Remove the four 4.3mm phillips screws from the bottom of the metal casing.
  • Remove the four 4.3mm phillips screws from the bottom of the metal casing.

Yorum Ekle

Lift and separate the top and bottom of the metal casing. You will now expose the motherboard and the AirPort card.
  • Lift and separate the top and bottom of the metal casing. You will now expose the motherboard and the AirPort card.

  • To remove the AirPort card, gently pull the plastic tab horizontally.

Yorum Ekle

Locate and remove the three 5.0mm phillips screws from the heat sink.
  • Locate and remove the three 5.0mm phillips screws from the heat sink.

  • Lift to remove the heat sink from the motherboard.

Yorum Ekle

Locate and remove the five 7.5mm phillips screws from the motherboard. Lift and separate the motherboard from the bottom metal casing.
  • Locate and remove the five 7.5mm phillips screws from the motherboard.

  • Lift and separate the motherboard from the bottom metal casing.

  • There will be a loose hexagonal female screw extender under the motherboard.

Yorum Ekle

Desolder the six connections located under the USB. Refer to How To Solder and Desolder Connections for soldering techniques.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 başka kişi bu kılavuzu tamamladı.

Michael Garcia

Üyelik tarihi: 12-10-2011

369 İtibar

5 adet Kılavuz yazıldı

Takım

Cal Poly, Team 17-15, Regan Fall 2011 Cal Poly, Team 17-15, Regan Fall 2011 üyesi

CPSU-REGAN-F11S17G15

3 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 Gün: 1

Son 30 Gün: 6

Tüm Zamanlar: 2,692