Apple Powerbook 520/540 General Disassembly

Yazan: Mark McNeff (ve 8 başka katılımcı)

Yorumlar: 6
Favoriler: 3
Tamamlanma: 8

Apple Powerbook 520/540 General Disassembly

Zorluk

Orta

Adımlar

Gerekli Süre

Bir süre öner??

Giriş

In order to obtain access to the internal components you must first follow this step by step general disassembly guide. This will be a first stop in installing a new component that is enclosed by the outer shell.

Aletler

Bu aletleri satın al

Essential Electronics Toolkit

$24.99

Satın Al

Parçalar

Hiçbir parça belirtilmedi.

Adım 1 Apple Powerbook 520/540 General Disassembly

Remove battery expansion cover and battery.

Turn computer over.
Remove battery expansion cover and battery.

Düzenle

Adım 2

With monitor hinge at the bottom, remove the two top center screws.

With monitor hinge at the bottom, remove the two top center screws.

Düzenle

Adım 3

Remove top left and top right screws.

Düzenle

Adım 4

Remove middle left and middle right screws.

Remove middle left and middle right screws.

Düzenle

Adım 5

Open computer kickstands.
Remove screws underneath each kickstand.

Düzenle

Adım 6

Lift keyboard from bottom and take out of shell.

Lift keyboard from bottom and take out of shell.

Düzenle

Adım 7

Lift the white ribbon clamps securing the keyboard ribbon cables to the motherboard. You can do this using a plastic opening tool.

Removing both ribbon cables from the motherboard will leave the clamps like so.

From here you can access the logic board, hard drive, and floppy drive.

Lift the white ribbon clamps securing the keyboard ribbon cables to the motherboard. You can do this using a plastic opening tool.
Removing both ribbon cables from the motherboard will leave the clamps like so.
From here you can access the logic board, hard drive, and floppy drive.