Ana içeriğe geç

Apple Watch Series 3 Battery Disconnection - prereq

Salt Önkoşul
Bu kılavuz yalnızca diğer kılavuzlar için bir ön koşul olarak kullanılmak üzere tasarlanmıştır. Tek başına eksiktir.

Neye ihtiyacın var

  1. Apple Watch Series 3 Battery Disconnection - prereq, Battery Disconnection: adım 1, 3 resimden 1. Apple Watch Series 3 Battery Disconnection - prereq, Battery Disconnection: adım 1, 3 resimden 2. Apple Watch Series 3 Battery Disconnection - prereq, Battery Disconnection: adım 1, 3 resimden 3.
    • Use a Y000 driver to remove the tri-point screw securing the metal cover plate.

    • Use a pair of tweezers to remove the cover plate.

    • First open the plate all the way to unhinge the two flaps.

    • Then close it halfway to remove it completely by lifting it out.

  2. Apple Watch Series 3 Battery Disconnection - prereq: adım 2, 3 resimden 1. Apple Watch Series 3 Battery Disconnection - prereq: adım 2, 3 resimden 2. Apple Watch Series 3 Battery Disconnection - prereq: adım 2, 3 resimden 3.
    • On the GPS-only version it is possible to disconnect the battery immediately. For the cellular/LTE version, you need to disconnect the Force Touch gasket and fold it out of the way first, in order to disconnect the battery.

    • Disconnect the battery by prying its connector straight up.

    • Bend the connector up slightly to make sure it does not make contact by accident.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Tobias Isakeit

Üyelik tarihi: 03/31/14

116.760 İtibar

188 adet Kılavuz yazıldı

Ekip

Master Techs Master Techs üyesi

Community

322 Üyeler

2.506 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 0

Her zaman: 120