Ana içeriğe geç

Giriş

This guide will show you how to replace the front button panel.

  1. Remove the plastic cover over the batteries on both sides of the device.
    • Remove the plastic cover over the batteries on both sides of the device.

  2. Remove the batteries (may require a plastic opening tool or spudger to pop the batteries out).
    • Remove the batteries (may require a plastic opening tool or spudger to pop the batteries out).

  3. Apple Watch Kitleri

    Screen and battery repairs just got easier.

    Hemen Alışveriş Yapın

    Apple Watch Kitleri

    Screen and battery repairs just got easier.

    Hemen Alışveriş Yapın
  4. Using the Philips Screwdriver, remove the top 2 screws.
    • Using the Philips Screwdriver, remove the top 2 screws.

    • The screws are very small (2.5mm), put them somewhere you won't lose them.

  5. Using the Philips screwdriver, remove the bottom 2 screws (2.5mm).
    • Using the Philips screwdriver, remove the bottom 2 screws (2.5mm).

  6. Remove the face. Remove the face.
    • Remove the face.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bryant Bucci

Üyelik tarihi: 21-03-2018

97 İtibar

1 Kılavuz yazıldı

Takım

IUPUI, Team S2-G3, Freund Spring 2018 IUPUI, Team S2-G3, Freund Spring 2018 üyesi

IUPUI-FREUND-S18S2G3

3 Üyeler

2 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 7

Her zaman: 81