Eşyalarını Tamir Et Topluluk Mağaza

ArmorAll AA255 Lower Motor Housing Replacement

Giriş

This guide describes the process of removing the main housing of the vacuum from the vacuum bucket and the opening of the main housing as a prerequisite to servicing or replacing the internal components.

Neye ihtiyacın var

  1. ArmorAll AA255 Lower Motor Housing Replacement, Lower Motor Housing: adım 1, 1 resimden 1.

    • Remove the orange main housing unit from the vacuum bucket by pulling outward on the handle tabs while lifting upward as shown.

    Düzenle

  2. ArmorAll AA255 Lower Motor Housing Replacement: adım 2, 1 resimden 1.

    • Remove the five 15mm PH2 screws.

    Düzenle

  4. ArmorAll AA255 Lower Motor Housing Replacement: adım 3, 1 resimden 1.

    • Remove the 15 mm T20 screw. This screw is located nearest the power cord.

    Düzenle

  5. ArmorAll AA255 Lower Motor Housing Replacement: adım 4, 2 resimden 1. ArmorAll AA255 Lower Motor Housing Replacement: adım 4, 2 resimden 2.

    • Gently separate the upper and lower sections of the main housing.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

5 farklı kişi bu kılavuzu tamamladı.

Yazar

2 tane daha katılımcı ile

Brad Patterson

Üyelik tarihi: 02/09/16

356 İtibar

1 Kılavuz yazıldı

Rozetler: 8

+5 tane daha rozet

Ekip

IUPUI, Team 2-1, Baechle Spring 2016 IUPUI, Team 2-1, Baechle Spring 2016 üyesi

IUPUI-BAECHLE-S16S2G1

4 Üyeler

4 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 2

Son 30 gün: 22

Her zaman: 867