Ana içeriğe geç
Onarım Topluluğuna Katılın - Hesap Oluşturun

Asus Eee PC 1008ha Trackpad Mouse Clicker Replacement

Görüntüleme: 1,5 B

İstatistikleri görüntüle:

Son 24 Saat:
1
Son 7 Gün:
13
Son 30 Gün:
83
Her zaman:
1.528
Yorumlar: 0

Hiç kimse bu kılavuza yorum bırakmadı. Birinci olacak mısın?

Go to guide comments
Tamamlandı: 1

1 kişi bu kılavuzu "tamamlandı" olarak işaretledi. Sıradaki sen olacak mısın?

Sık Kullanılanlar: 1

1 kişi bu kılavuzu favorilerine ekledi (ve abone oldu). Sıradaki sen olacak mısın?

Gerekli Süre: 10 dakika
Zorluk: Kolay
İşlem Görüntüleri

Öykünün yıldızı olun! Belirli eylemlerin nasıl gerçekleştirileceğini daha iyi göstermek için bu kılavuza resimler gerekli.

Daha İyi Resimler Gerekli

Daha iyi fotoğraflar bu kılavuzu geliştirecektir. Yeni fotoğraflar çekerek, düzenleyerek ya da yükleyerek katkıda bulunun!

Eksik Adımlar

Hata! Bu kılavuzda şu anda bir veya daha fazla önemli adım eksik.

Asus Eee PC 1008ha Trackpad Mouse Clicker Replacement

This guide will provide detailed steps to help replace the trackpad's mouse buttons. This guide will help users who are experiencing problems with the mouse button such as sensitivity. In order to fix the issue(s), the user will remove the keyboard of the laptop and unscrew the mouseclicker part.

Neye ihtiyacın var

Parçalar

Aletler

    1. Asus Eee PC 1008ha Trackpad Mouse Clicker Replacement, Trackpad Mouse Clicker (the button's on the bottom of the trackpad): adım 1, 1 resimden 1.
      • Use an opening too to carefully separate the palm rest assembly from the base of the laptop.

      • Move the opening tool around the perimeter of the palm rest and the base and use it as a wedge.

      • You will need to undo the clips holding the two parts together with the opening tool. Be careful not to break the clips.

      FixBot'a Sor

      Yorum Ekle

    2. Asus Eee PC 1008ha Trackpad Mouse Clicker Replacement: adım 2, 2 resimden 1. Asus Eee PC 1008ha Trackpad Mouse Clicker Replacement: adım 2, 2 resimden 2.
      Bu adımda kullanılan alet:
      Tweezers
      $4.99
      • Use a spudger to open the cable locks and remove the ribbon cables using your hands or tweezers.

      • Using a Phillips #00 screwdriver, remove the two 4 mm screws on either side of the circuit board.

      FixBot'a Sor

      Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

İptal et: Bu kılavuzu tamamlamadım.

Bir başkası bu kılavuzu tamamladı.

Michael Dooley

Üyelik tarihi: 04/18/13

138 İtibar

3 adet Kılavuz yazıldı

Ekip

Cal Poly, Team 21-52, Johann Spring 2013 Cal Poly, Team 21-52, Johann Spring 2013 üyesi

CPSU-JOHANN-S13S21G52

4 Üyeler

72 adet Kılavuz yazıldı

0Kılavuz Yorumları

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 gün: 13

Son 30 gün: 83

Her zaman: 1,528