Aletler

Parçalar

Hiçbir parçaya gerek yok.

  1. unscrew these two screws to remove the coverage
    • unscrew these two screws to remove the coverage

  2. unscrew these four screws to take out the case with the hard drive disk
    • unscrew these four screws to take out the case with the hard drive disk

  3. slip the hard drive to the left
    • slip the hard drive to the left

  4. Pro Tech Toolkit içeren veya $100,00tüm siparişlerde ücretsiz kargo!

    Mağazamıza Göz Atın
  5. pull the strap to remove the hard drive's case
    • pull the strap to remove the hard drive's case

  6. unscrew the four screws of the case to remove the hard drive out of that case
    • unscrew the four screws of the case to remove the hard drive out of that case

  7. remove the hard drice from its case
    • remove the hard drice from its case

  8. put the new hard drive or SSD, respectively in the case and fix the screws again (the HDD/SDD will only fit in the case in one way)
    • put the new hard drive or SSD, respectively in the case and fix the screws again (the HDD/SDD will only fit in the case in one way)

  9. slip the case to the right to plug in the HDD/SDD again
    • slip the case to the right to plug in the HDD/SDD again

  10. close the case again
    • close the case again

Sonuç

To reassemble your device, follow these instructions in reverse order.

Mojo

Üyelik tarihi: 22-09-2014

113 İtibar

1 Kılavuz yazıldı

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 1

Son 30 Gün: 22

Her zaman: 1,252