Giriş

This guide will help you replace the wireless card in case you are upgrading or component failure. Be sure to follow this guide in a well lit room on a flat surface. Acquire the necessary tools before hand and have a cup or a magnetic plate to keep track of all the screws.

  1. Remove the ten 10mm Phillips #0 screws on the back of the laptop.
    • Remove the ten 10mm Phillips #0 screws on the back of the laptop.

  2. Use the iFixit opening tool along the edge of the laptop to pry open the back.
    • Use the iFixit opening tool along the edge of the laptop to pry open the back.

  3. Pro Tech Toolkit içeren veya $100tüm siparişlerde ücretsiz kargo!

    Mağazamıza Göz Atın
  4. Remember the position of the wires. You will then pull off the two wires connected to the wireless card.
    • Remember the position of the wires. You will then pull off the two wires connected to the wireless card.

  5. Remove the screw holding down the wireless card.
    • Remove the screw holding down the wireless card.

    • After the screw disconnects the card "jumps up" a little.

  6. Pull the wireless card out of its socket.
    • Pull the wireless card out of its socket.

Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Houston Koontz

Üyelik tarihi: 06-11-2018

307 İtibar

2 adet Kılavuz yazıldı

Takım

IUPUI, Team S1-G2, Hovde Fall 2018 IUPUI, Team S1-G2, Hovde Fall 2018 üyesi

IUPUI-HOVDE-F18S1G2

3 Üyeler

3 adet Kılavuz yazıldı

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 5

Her zaman: 49