Eşyalarını Tamir Et Topluluk Mağaza

Asus Q534U CPU Fan/Heat Sink Replacement

Giriş

This guide will go over the process of removing and replacing the CPU fan and heat sink assembly.

Neye ihtiyacın var

  1. Asus Q534U CPU Fan/Heat Sink Replacement, Back Case Removal: adım 1, 1 resimden 1.

    • Make sure the device is turned off and unplugged from the charger.

    • Use a T5 screwdriver to remove all 10 screws that secure the bottom cover.

    • Pull off the back cover of the laptop.

    • A pry tool may be needed to pull off the back cover.

    Düzenle

  2. Asus Q534U CPU Fan/Heat Sink Replacement: adım 2, 2 resimden 1. Asus Q534U CPU Fan/Heat Sink Replacement: adım 2, 2 resimden 2.

    • Wedge an opening tool under the battery's bundled cable connector, and gently pry the connector up and to disconnect the battery.

    Düzenle

  4. Asus Q534U CPU Fan/Heat Sink Replacement: adım 3, 2 resimden 1. Asus Q534U CPU Fan/Heat Sink Replacement: adım 3, 2 resimden 2.

    • Lift up the black tab next to the silver ribbon cable.

    • Pull lightly on the blue tabs until the silver cable is free.

    Düzenle

  5. Asus Q534U CPU Fan/Heat Sink Replacement: adım 4, 1 resimden 1.

    • Use a Phillips #00 screwdriver to remove the 5 marked screws.

    • Gently remove the battery.

    • Do not bend or puncture the laptop's lithium-polymer pattery.

    Düzenle

  6. Asus Q534U CPU Fan/Heat Sink Replacement, CPU Fan/Heat Sink: adım 5, 2 resimden 1. Asus Q534U CPU Fan/Heat Sink Replacement, CPU Fan/Heat Sink: adım 5, 2 resimden 2.

    • Using the iFixit opening tool, gently pry the CPU fan connector out of the socket.

    Düzenle

  7. Asus Q534U CPU Fan/Heat Sink Replacement: adım 6, 2 resimden 1. Asus Q534U CPU Fan/Heat Sink Replacement: adım 6, 2 resimden 2.

    • Move the black cable located around the CPU fan out of the holder.

    • Remove the following 9 screws:

    • Three Phillips screws

    • Six Phillips screws

    • Make sure not to mix up both types of screws.

    • Gently pull vertically on the CPU fan/ heat sink assembly until it is free.

    • Before placing a new CPU fan/heat sink assembly, the CPU and GPU surfaces must be cleaned off and thermal compound must be reapplied.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

4 farklı kişi bu kılavuzu tamamladı.

Yazar

2 tane daha katılımcı ile

mmedina

Üyelik tarihi: 04/07/16

749 İtibar

2 adet Kılavuz yazıldı

Rozetler: 15

+12 tane daha rozet

Ekip

UMass Dartmouth, Team S66-G6, Rockett Fall 2017 UMass Dartmouth, Team S66-G6, Rockett Fall 2017 üyesi

UMASSD-ROCKETT-F17S66G6

3 Üyeler

5 adet Kılavuz yazıldı

Bir Yorum

Is it possible to replace the fan only without removing the full heatsink or is it fused together as one unit?

Bork Bois - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 8

Son 30 gün: 25

Her zaman: 2,891