Ana içeriğe geç

Giriş

This guide will show you how to replace the back panel on the ASUS ROG G53SW-XT1

  1. Unplug the power cable and flip the computer over.
    • Unplug the power cable and flip the computer over.

  2. Unlock the battery by pushing the switch to the right.
    • Unlock the battery by pushing the switch to the right.

  3. Push and hold the left switch, then pull the battery out. Push and hold the left switch, then pull the battery out.
    • Push and hold the left switch, then pull the battery out.

  4. Dizüstü Bilgisayar Bataryaları

    An easy fix for a big power boost.

    Hemen Alışveriş Yapın

    Dizüstü Bilgisayar Bataryaları

    An easy fix for a big power boost.

    Hemen Alışveriş Yapın
  5. Insert a spudger, or plastic opening tool, into these five slots and pry upwards to pop up the keyboard. Insert a spudger, or plastic opening tool, into these five slots and pry upwards to pop up the keyboard. Insert a spudger, or plastic opening tool, into these five slots and pry upwards to pop up the keyboard.
    • Insert a spudger, or plastic opening tool, into these five slots and pry upwards to pop up the keyboard.

  6. Disconnect the keyboard ribbon cables from the motherboard. Disconnect the keyboard ribbon cables from the motherboard. Disconnect the keyboard ribbon cables from the motherboard.
    • Disconnect the keyboard ribbon cables from the motherboard.

  7. Insert your screwdriver into the locking mechanism and slide it to the left. This will unlock the hand rest and allow you to pull it free. Insert your screwdriver into the locking mechanism and slide it to the left. This will unlock the hand rest and allow you to pull it free. Insert your screwdriver into the locking mechanism and slide it to the left. This will unlock the hand rest and allow you to pull it free.
    • Insert your screwdriver into the locking mechanism and slide it to the left. This will unlock the hand rest and allow you to pull it free.

  8. Remove the fourteen Phillips #0 screws.
    • Remove the fourteen Phillips #0 screws.

  9. Flip the laptop over and pull off the bottom cover. Flip the laptop over and pull off the bottom cover.
    • Flip the laptop over and pull off the bottom cover.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Bir başkası bu kılavuzu tamamladı.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 2

Son 30 Gün: 9

Her zaman: 191