Giriş

To access your hard drive, remove the back plate as shown in these steps.

  1. With the computer upside down, lift up on the rubber cap on the back plate to access the captive Phillips #2 screw.
    • With the computer upside down, lift up on the rubber cap on the back plate to access the captive Phillips #2 screw.

  2. Retract the Phillips #2 screw until the cover is loose.
    • Retract the Phillips #2 screw until the cover is loose.

    • The screw will not come all the way out.

    • Pry around the edges of the plate using a plastic opening tool until the plate is removed.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Tanner

Üyelik tarihi: 21-09-2018

761 İtibar

5 adet Kılavuz yazıldı

0 Yorum

İstatistikleri Görüntüle:

Son 24 Saat: 1

Son 7 Gün: 22

Son 30 Gün: 27

Her zaman: 49