Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Parçalar ve Aletler

Giriş

The keyboard for the Asus ROG G751JL-BSI7T28 is an integral part of the laptop. Use this guide if your keyboard is malfunctioning or has stopped working.

  1. With the laptop closed, turn it upside-down so the bottom is facing up toward you.
    • With the laptop closed, turn it upside-down so the bottom is facing up toward you.

  2. Place a spudger into the notch, and pry the small triangular piece away from the laptop. Remove the single 3mm Phillips #0 screw. Place a spudger beneath the back panel, and pry it away from the laptop.
    • Place a spudger into the notch, and pry the small triangular piece away from the laptop.

    • Remove the single 3mm Phillips #0 screw.

    • Place a spudger beneath the back panel, and pry it away from the laptop.

  3. Remove all 5mm Phillips #0 screws from the back cover. Remove all 5mm Phillips #0 screws from the back cover.
    • Remove all 5mm Phillips #0 screws from the back cover.

  4. LCD iPhone Ekran Tamir Kit'leri

    Ömür Boyu Garantimiz kapsamındaki bütçe seçeneği.

    Shop Kits

    LCD iPhone Ekran Tamir Kit'leri

    Onarım maliyetlerini düşürün, kaliteyi değil.

    Shop Kits
  5. Use a spudger to pry the disc drive out of the laptop. Use a spudger to pry the disc drive out of the laptop.
    • Use a spudger to pry the disc drive out of the laptop.

  6. Open the laptop and turn it so that the ASUS logo is facing you. Pull up on the display hinge housing shroud. Disconnect the RGB light power cable in the shroud before fully removing it.
    • Open the laptop and turn it so that the ASUS logo is facing you.

    • Pull up on the display hinge housing shroud.

    • Disconnect the RGB light power cable in the shroud before fully removing it.

  7. Remove the 5mm Phillips #0 screws. Lift up the silver brackets on each side of the laptop. Lift up the silver brackets on each side of the laptop.
    • Remove the 5mm Phillips #0 screws.

    • Lift up the silver brackets on each side of the laptop.

  8. Remove the 5mm Phillips #0 screws from the hinges. Detach the ribbon cable, and remove the display assembly from the laptop.
    • Remove the 5mm Phillips #0 screws from the hinges.

    • Detach the ribbon cable, and remove the display assembly from the laptop.

  9. Lift the keyboard up. Use an opening tool to detach the ribbon cables connecting the keyboard to the rest of the laptop.
    • Lift the keyboard up.

    • Use an opening tool to detach the ribbon cables connecting the keyboard to the rest of the laptop.

    • Remove the keyboard from the laptop.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Kristen Gismondi

Üyelik tarihi: 12-11-2014

31.277 İtibar

52 adet Kılavuz yazıldı

Takım

iFixit iFixit üyesi

Community

111 Üyeler

10.682 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 1

Son 30 gün: 3

Her zaman: 38