Eşyalarını Tamir Et Topluluk Mağaza

Asus RT-N56U Disassembly

Giriş

The Asus RT-N56U Wireless Router was released in Early 2011. It featured both 2.4GHz and 5GHz wireless networking, 2 USB 2.0 Ports, 4 Ethernet Ports, and a thin & stylish design!

Neye ihtiyacın var

  1. Asus RT-N56U Disassembly, Stand Removal: adım 1, 3 resimden 1. Asus RT-N56U Disassembly, Stand Removal: adım 1, 3 resimden 2. Asus RT-N56U Disassembly, Stand Removal: adım 1, 3 resimden 3.

    • If the stand is slotted into the bottom, flip the router upside down and gently pull right to remove it.

    Düzenle

  2. Asus RT-N56U Disassembly, Peeling Sticker: adım 2, 3 resimden 1. Asus RT-N56U Disassembly, Peeling Sticker: adım 2, 3 resimden 2. Asus RT-N56U Disassembly, Peeling Sticker: adım 2, 3 resimden 3.

    • Work carefully to peel the label on the back side off.

    • Try not to damage the label, as it can be important later.

    Düzenle

  4. Asus RT-N56U Disassembly, Case Screws: adım 3, 3 resimden 1. Asus RT-N56U Disassembly, Case Screws: adım 3, 3 resimden 2. Asus RT-N56U Disassembly, Case Screws: adım 3, 3 resimden 3.

    • Unscrew the 2 Phillips screws securing the front casing in place.

    Düzenle

  5. Asus RT-N56U Disassembly, Plastic Clips & Adhesive: adım 4, 3 resimden 1. Asus RT-N56U Disassembly, Plastic Clips & Adhesive: adım 4, 3 resimden 2. Asus RT-N56U Disassembly, Plastic Clips & Adhesive: adım 4, 3 resimden 3.

    • Remove the adhesive and clips also securing the front casing and lift it like a book from the left side, then remove it.

    Düzenle

  6. Asus RT-N56U Disassembly, Board Screws: adım 5, 3 resimden 1. Asus RT-N56U Disassembly, Board Screws: adım 5, 3 resimden 2. Asus RT-N56U Disassembly, Board Screws: adım 5, 3 resimden 3.

    • Remove the 2 Phillips screws securing the main board to the casing.

    Düzenle

  7. Asus RT-N56U Disassembly, Removing the Board: adım 6, 3 resimden 1. Asus RT-N56U Disassembly, Removing the Board: adım 6, 3 resimden 2. Asus RT-N56U Disassembly, Removing the Board: adım 6, 3 resimden 3.

    • Lift to around a 20° angle.

    • Gently pull up slightly, then the board should unlock to allow you to rotate it to around a 90° angle and remove it.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

1 tane daha katılımcı ile

afixer

Üyelik tarihi: 04/14/23

201 İtibar

1 Kılavuz yazıldı

Rozetler: 7

+4 tane daha rozet

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 11

Her zaman: 177