Flip the computer over so that it is upside down. Slide both latches away from each other (towards the outside).
  • Flip the computer over so that it is upside down.

  • Slide both latches away from each other (towards the outside).

  • Push the battery out with your fingers.

  • The actual battery is not shown in the photograph.

Yorum Ekle

Remove the two screws on the underside of the case.
  • Remove the two screws on the underside of the case.

  • These screws should should have a keyboard "K" symbol next to them.

Yorum Ekle

Locate the little tabs above the INSERT, F10 and F1 keys, and between the F5 and F6 keys. Starting with the tab above the F1 key, press the tabs inward using your fingernail or spudger. Continue this process for the rest of the tabs. Once all four tabs have been released, the top half of the keyboard should be free.
  • Locate the little tabs above the INSERT, F10 and F1 keys, and between the F5 and F6 keys.

  • Starting with the tab above the F1 key, press the tabs inward using your fingernail or spudger. Continue this process for the rest of the tabs.

  • Once all four tabs have been released, the top half of the keyboard should be free.

Yorum Ekle

Pull the keyboard out at a 45 degree angle and place it upside down on the scroll pad. Pull the wide ribbon cable laterally from its socket on the motherboard.
  • Pull the keyboard out at a 45 degree angle and place it upside down on the scroll pad.

  • Pull the wide ribbon cable laterally from its socket on the motherboard.

Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Steven

Üyelik tarihi: 24-06-2010

32 İtibar

2 adet Kılavuz yazıldı

Takım

Cal Poly, Team 2-9, Johann Summer 2010 Cal Poly, Team 2-9, Johann Summer 2010 üyesi

CPSU-JOHANN-R10S2G9

5 Üyeler

11 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 1

Tüm Zamanlar: 4,718