Ana içeriğe geç

Giriş

The battery is the main source of power to the computer. Often times batteries will lose charge and need to be replaced. If the laptop won't turn on without the power cable, use this guide to replace the battery.

Parçalar

Hiçbir parça belirtilmedi.

  1. Before doing a replacement, make sure the laptop is fully shut off. Using the JIS #0 Screwdriver, unscrew the ten 10 mm screws that hold the back casing in place.
    • Before doing a replacement, make sure the laptop is fully shut off.

    • Using the JIS #0 Screwdriver, unscrew the ten 10 mm screws that hold the back casing in place.

  2. Pry open the back casing using the opening tool along the side crevice. Try to use the opening tool at multiple points. Lifting the back casing abruptly could damage the laptop.
    • Pry open the back casing using the opening tool along the side crevice.

    • Try to use the opening tool at multiple points. Lifting the back casing abruptly could damage the laptop.

  3. Using the JIS #0 Screwdriver, remove the five 5.0 mm screws that hold down the battery. Using the JIS #0 Screwdriver, remove the five 5.0 mm screws that hold down the battery.
    • Using the JIS #0 Screwdriver, remove the five 5.0 mm screws that hold down the battery.

  4. Disconnect the cable connected to the motherboard. To remove, lift the ends using the opening tool.
    • Disconnect the cable connected to the motherboard.

    • To remove, lift the ends using the opening tool.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Aymane Elbernoussi

Üyelik tarihi: 14-02-2018

160 İtibar

1 Kılavuz yazıldı

Takım

USF Tampa, Team S5-G5, Eyestone Spring 2018 USF Tampa, Team S5-G5, Eyestone Spring 2018 üyesi

USFT-EYESTONE-S18S5G5

4 Üyeler

5 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 2

Her zaman: 172