1. Remove the battery, then unscrew the 7 3 mm Phillips screws behind the battery. Make sure they go in separate, organized piles.
    • Remove the battery, then unscrew the 7 3 mm Phillips screws behind the battery. Make sure they go in separate, organized piles.

    • Unscrew the 2 4 mm Phillips head screws by the battery.

    Yorum Ekle

  2. Remove the panel above the keyboard with a plastic spudger.
    • Remove the panel above the keyboard with a plastic spudger.

    Yorum Ekle

    • Once the panel is removed, use the spudger to pry out the keyboard.

    • Do not fully remove, for the keyboard is still attached to the ribbon cable.

    Yorum Ekle

    • Detach the ribbon cable from the keyboard by pulling the end of the ribbon cable that is attached inside of the laptop.

    • Be sure to detach from the root rather than from near the middle. It should slide out with ease.

    • Now you can fully remove the keyboard from the laptop.

    Yorum Ekle

Sonuç

To reassemble your device, follow these instructions in reverse order.

Joe Redfearn

Üyelik tarihi: 14-04-2014

101 İtibar

1 Kılavuz yazıldı

Takım

Cal Poly, Team 13-29, Maness Spring 2014 Cal Poly, Team 13-29, Maness Spring 2014 üyesi

CPSU-MANESS-S14S13G29

4 Üyeler

8 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 0

Her zaman: 182