Eşyalarını Tamir Et Topluluk Mağaza

Audio-Technica AT-LP60BK-BT Belt Drive Replacement

Giriş

This guide will deal with how to replace the broken or missing belt drive for Audio-Technica AT-LP60BK-BT Bluetooth Wireless Turntable. The rubber band could cause a malfunction and break after using a long time or under extreme temperatures.

Before using this guide, make sure the size of the new belt is designed specifically for this model to avoid motor overheat problem.

Neye ihtiyacın var

  1. Audio-Technica AT-LP60BK-BT Belt Drive Replacement, Belt Drive: adım 1, 2 resimden 1. Audio-Technica AT-LP60BK-BT Belt Drive Replacement, Belt Drive: adım 1, 2 resimden 2.

    • Open the top plastic cover and remove the record and rubber mat.

    Düzenle

  2. Audio-Technica AT-LP60BK-BT Belt Drive Replacement: adım 2, 2 resimden 1. Audio-Technica AT-LP60BK-BT Belt Drive Replacement: adım 2, 2 resimden 2.

    • Find the belt underneath the platter by rotating the platter to the correct place.

    • Remove the belt from the motor pulley.

    Düzenle

  3. Audio-Technica AT-LP60BK-BT Belt Drive Replacement: adım 3, 1 resimden 1.

    • Take the platter off by pulling it straight up.

    Düzenle

  4. Audio-Technica AT-LP60BK-BT Belt Drive Replacement: adım 4, 2 resimden 1. Audio-Technica AT-LP60BK-BT Belt Drive Replacement: adım 4, 2 resimden 2.

    • Remove the old belt.

    Düzenle

  6. Audio-Technica AT-LP60BK-BT Belt Drive Replacement: adım 5, 1 resimden 1.

    • Turn platter upside down.

    Düzenle

  7. Audio-Technica AT-LP60BK-BT Belt Drive Replacement: adım 6, 3 resimden 1. Audio-Technica AT-LP60BK-BT Belt Drive Replacement: adım 6, 3 resimden 2. Audio-Technica AT-LP60BK-BT Belt Drive Replacement: adım 6, 3 resimden 3.

    • Place the new belt around the inner lap on the upside-down platter.

    • Make sure the rubber band is flat on the platter, with no flipping.

    Düzenle

  8. Audio-Technica AT-LP60BK-BT Belt Drive Replacement: adım 7, 1 resimden 1.

    • Turn the platter around.

    • Grab the belt around with a finger through one of the holes in the platter.

    Düzenle

  9. Audio-Technica AT-LP60BK-BT Belt Drive Replacement: adım 8, 1 resimden 1.

    • Put the platter straight down.

    Düzenle

  10. Audio-Technica AT-LP60BK-BT Belt Drive Replacement: adım 9, 1 resimden 1.

    • Put the belt around the motor pulley.

    Düzenle

  11. Audio-Technica AT-LP60BK-BT Belt Drive Replacement: adım 10, 3 resimden 1. Audio-Technica AT-LP60BK-BT Belt Drive Replacement: adım 10, 3 resimden 2. Audio-Technica AT-LP60BK-BT Belt Drive Replacement: adım 10, 3 resimden 3.

    • Test the function by spinning the platter and put the rubber mat into place.

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

2 farklı kişi bu kılavuzu tamamladı.

Yazar

3 tane daha katılımcı ile

Zonghao Li

Üyelik tarihi: 01/20/21

235 İtibar

1 Kılavuz yazıldı

Rozetler: 7

+4 tane daha rozet

Ekip

York University, Team S1-G15, Melo-Thaiss Winter 2021 York University, Team S1-G15, Melo-Thaiss Winter 2021 üyesi

YORK-MELO-THAISS-W21S1G15

1 Üye

4 adet Kılavuz yazıldı

2 Yorum

Thank you so much!

Joe - Yanıt

Ditto that! Thanks for the clear directions.

Steph - Yanıt

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 30

Son 7 gün: 224

Son 30 gün: 920

Her zaman: 18,330