Giriş
The LCD screen is the main display of the Audiovox CDM-8910.
Neye ihtiyacın var
-
-
With phone in the flipped-open position, use a spudger to remove the four (4) rubber pads (one shown in red circle) located near the corners of the face with the LCD screen.
FixBot'a Sor
-
-
-
Use a small Phillips head screwdriver to remove the four (4) screws exposed by removed rubber pads.
-
-
-
Use a spudger to pry the front cover off of the phone, gradually working your way around the front face.
-
-
-
-
Use a spudger to lift away and remove the metallic frame (in blue).
-
Use the spudger to lift away the two electrical contacts (in red).
-
Use the spudger to lift away the speaker (in yellow).
-
-
-
This is what the rear of the LCD screen should look like before proceeding. Note all necessary connections are undone.
-
To reassemble your device, follow these instructions in reverse order.
İptal et: Bu kılavuzu tamamlamadım.
Bir başkası bu kılavuzu tamamladı.
Ekip
Cal Poly, Team 3-24, Regan Fall 2010 Cal Poly, Team 3-24, Regan Fall 2010 üyesi
CPSU-REGAN-F10S3G24
4 Üyeler
12 adet Kılavuz yazıldı
