Ana içeriğe geç

Eşyalarını Tamir Et

Onarma Hakkı

Mağaza

  1. To enable manual mode, flip the switch to "Manual Mode" LCD screen will turn on
    • To enable manual mode, flip the switch to "Manual Mode"

    • LCD screen will turn on

  2. Press On then press Start Sampling Press Enter
    • Press On then press Start Sampling

    • Press Enter

  3. Press the number of the bottle you want to sample on Press Enter LCD should now show which bottle it will take a sample in
    • Press the number of the bottle you want to sample on

    • Press Enter

    • LCD should now show which bottle it will take a sample in

  4. To enable autonomous mode, flip switch to "Node Trigger Mode" LCD should turn off
    • To enable autonomous mode, flip switch to "Node Trigger Mode"

    • LCD should turn off

    • If the autosampler is to be remotely triggered, avoid using the ON/OFF button to power off the sampler.

Sonuç

Now the sampler is ready to be triggered remotely by an open-storm sensor node.

Bir başkası bu kılavuzu tamamladı.

Brandon Wong

Üyelik tarihi: 16-01-2018

502 İtibar

2 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 gün: 0

Son 30 gün: 4

Her zaman: 365