Eşyalarını Tamir Et Topluluk Mağaza

Axess TA2513-10WT Battery Replacement

Neye ihtiyacın var

  1. Axess TA2513-10WT Battery Replacement, Back Cover: adım 1, 1 resimden 1.

    • Lay the tablet down on a flat surface with the screen facing up, and the external camera facing upwards and closest to you.

    Düzenle

  2. Axess TA2513-10WT Battery Replacement: adım 2, 3 resimden 1. Axess TA2513-10WT Battery Replacement: adım 2, 3 resimden 2. Axess TA2513-10WT Battery Replacement: adım 2, 3 resimden 3.

    • Insert the plastic opening tool in the space between the screen and the back cover above the volume buttons.

    • Slide the plastic opening tool gently along the sides.

    • If a small gap is not created between the screen and the back cover, pry gently upward at each of these latching points.

    Düzenle

  3. Axess TA2513-10WT Battery Replacement: adım 3, 1 resimden 1.

    • Place the spudger in an open space to keep the back case from shutting while you continue to slide the opening tool.

    Düzenle

  4. Axess TA2513-10WT Battery Replacement: adım 4, 1 resimden 1.

    • Remove the back cover with your hands once all points have been unlatched. It should separate completely from the screen that contains the battery and chip components.

    Düzenle

  6. Axess TA2513-10WT Battery Replacement, Battery: adım 5, 1 resimden 1.

    • Shove the Spudger below the battery pack to remove any tape or adhesive residue.

    Düzenle

  7. Axess TA2513-10WT Battery Replacement: adım 6, 1 resimden 1.

    • Lift the battery up with your hands to ensure complete detachment from the screen.

    Düzenle

  8. Axess TA2513-10WT Battery Replacement: adım 7, 1 resimden 1.

    • Identify the red wire attached to the node labeled "B+" and the black wire attached to the node labeled "B-"

    Düzenle

  9. Axess TA2513-10WT Battery Replacement: adım 8, 1 resimden 1.

    • Press the heated soldering iron down on the "B+" node while simultaneously tugging on the red wire.

    Düzenle

  10. Axess TA2513-10WT Battery Replacement: adım 9, 1 resimden 1.

    • Remove the red wire from the node labeled "B+"

    Düzenle

  11. Axess TA2513-10WT Battery Replacement: adım 10, 1 resimden 1.

    • Using the same process as the red wire, detach the black wire from the node labeled "B-".

    Düzenle

  12. Axess TA2513-10WT Battery Replacement: adım 11, 1 resimden 1.

    • The battery should now be separated from both the screen and circuit board

    Düzenle
Sonuç

To reassemble your device, follow these instructions in reverse order.

Yazar

2 tane daha katılımcı ile

Steven Kavanagh

Üyelik tarihi: 03/24/15

301 İtibar

3 adet Kılavuz yazıldı

Rozetler: 3

Ekip

Baylor, Team 6-3, Shaver Spring 2015 Baylor, Team 6-3, Shaver Spring 2015 üyesi

BU-SHAVER-S15S6G3

3 Üyeler

10 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 2

Son 7 gün: 6

Son 30 gün: 8

Her zaman: 296