Ana içeriğe geç

Giriş

The battery is what powers the device. The battery is secured by a sticky adhesive label and glue so be cautious when removing.

Parçalar

Hiçbir parça belirtilmedi.

  1. Pry the back cover from the bottom of the phone, pulling outwards and upwards.
    • Pry the back cover from the bottom of the phone, pulling outwards and upwards.

  2. Fully remove the cover and set aside in a safe place.
    • Fully remove the cover and set aside in a safe place.

  3. iPhone Pil Tamir Setleri

    Only $29.99

    Buy Now

    iPhone Pil Tamir Setleri

    Only $29.99

    Buy Now
  4. Remove all the nine 2mm screws using the JIS #00 Screwdriver.
    • Remove all the nine 2mm screws using the JIS #00 Screwdriver.

  5. Pry the frame off using the spudger pulling upwards going to different areas around the device.
    • Pry the frame off using the spudger pulling upwards going to different areas around the device.

    • The back cover is secured by glue. Removal could be more difficult than expected.

  6. Remove the battery out using the black nylon spudger. Battery is secured by glue so use more force to take it out.
    • Remove the battery out using the black nylon spudger.

    • Battery is secured by glue so use more force to take it out.

Sonuç

To reassemble your device, follow these instructions in reverse order.

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 4

Son 30 Gün: 22

Her zaman: 207