BRCK v1 Modem Replacement

Jeret Buerger ve 4 diğer katkıda bulunanlar

En son May 7, 2024 tarihinde güncellendi

15 dakika

Orta

Giriş

Using a hex 2.0 driver, you will take off the top cover in order to access the modem. With a pair of tweezers you will be able to remove and replace the modem.

Neye ihtiyacın var

Aletler

Adım 1 Top Cover

BRCK v1 Modem Replacement, Top Cover: adım 1, 1 resimden 1.

Place the face of the device showing BRCK face up.

Düzenle

Adım 2

Remove the four screws(4mm hex head) on the corners of the device with a Hex 2.0 Screwdriver.

Düzenle

Adım 3

Remove the top cover.

Düzenle

Adım 4 Modem

BRCK v1 Modem Replacement, Modem: adım 4, 1 resimden 1.

Cut the black zip tie holding the modem down.
Caution By cutting the zip tie, you void any manufacturer warranty you may have on the device.

Düzenle

Adım 5

Remove the connection located on the edge of the modem.

Düzenle

Adım 6

Slightly lift the modem to reveal the brown ribbon connector and metal connection plate, located on the bottom of the modem.

Düzenle

Adım 7

BRCK v1 Modem Replacement: adım 7, 3 resimden 3.

Bu adımda kullanılan alet:

Tweezers

$4.99

Sepete Ekle

Using your tweezers, gently push on the metal plate and slide it down toward the base of the modem to release the locking mechanism.
Lower the plate and gently pull the ribbon out of the face plate.
Caution Be extremely gentle while preforming this step. The ribbon is brittle and prone to breaking if bent too much. Make sure you go slowly so that you do not damage the device.