Ana içeriğe geç

Giriş

In this guide, you will learn how to replace the battery terminals

  1. Set the device on it's face with the back facing up.
    • Set the device on it's face with the back facing up.

  2. Begin by removing all highlighted screws with a using a Phillips #1 Screwdriver.
    • Begin by removing all highlighted screws with a using a Phillips #1 Screwdriver.

  3. Remove the battery plate with a plastic opening tool and set it aside.
    • Remove the battery plate with a plastic opening tool and set it aside.

  4. Remove each battery with a plastic opening tool and set them aside.
    • Remove each battery with a plastic opening tool and set them aside.

  5. Separate the device in two parts by using the plastic opening tool.
    • Separate the device in two parts by using the plastic opening tool.

  6. Remove the top piece and place it aside, keeping the bottom half with the mechanics.
    • Remove the top piece and place it aside, keeping the bottom half with the mechanics.

  7. Remove the highlighted screws using a Phillips #1 Screwdriver.
    • Remove the highlighted screws using a Phillips #1 Screwdriver.

  8. Use the plastic opening tool and carefully set the LED panel to the side, exposing the wires underneath.
    • Use the plastic opening tool and carefully set the LED panel to the side, exposing the wires underneath.

  9. With the precision tweezers, straighten the metal connectors to remove the terminals from the other side.
    • With the precision tweezers, straighten the metal connectors to remove the terminals from the other side.

  10. Sever the red wire from the metal connector with the precision tweezers. Sever the red wire from the metal connector with the precision tweezers.
    • Sever the red wire from the metal connector with the precision tweezers.

  11. Sever the black wire from the metal connector with the precision tweezers. Sever the black wire from the metal connector with the precision tweezers.
    • Sever the black wire from the metal connector with the precision tweezers.

  12. Flip the device on its face and remove the battery terminals with a metal spudger. Flip the device on its face and remove the battery terminals with a metal spudger.
    • Flip the device on its face and remove the battery terminals with a metal spudger.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Shreya Sunny

Üyelik tarihi: 04-09-2015

604 İtibar

6 adet Kılavuz yazıldı

Takım

USF Tampa, Team 2-2, Sullivan Fall 2015 USF Tampa, Team 2-2, Sullivan Fall 2015 üyesi

USFT-SULLIVAN-F15S2G2

4 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 3

Her zaman: 201