Ana içeriğe geç

Giriş

In this guide, you will learn how to remove and replace the individual LED lights inside the device

  1. Place the device face down on a flat surface, so that the screws on the back are facing the ceiling.
    • Place the device face down on a flat surface, so that the screws on the back are facing the ceiling.

  2. Using a screwdriver loosen the four screws connecting the body of the device together.
    • Using a screwdriver loosen the four screws connecting the body of the device together.

  3. Once unscrewed, pop the back of the device off using the plastic opening tool.
    • Once unscrewed, pop the back of the device off using the plastic opening tool.

  4. Once unscrewed, take the back of the body and put it aside. We will be working with the front part of the device.
    • Once unscrewed, take the back of the body and put it aside. We will be working with the front part of the device.

  5. Using  a screwdriver loosen the screws on the lights panel.
    • Using a screwdriver loosen the screws on the lights panel.

  6. Using a plastic opening tool pop the light panel off. Be careful as to not rip any of the wires from the panel.
    • Using a plastic opening tool pop the light panel off. Be careful as to not rip any of the wires from the panel.

  7. Carefully pull the LED lights off with a pair of tweezers. Once off, put in and connect a replacement. Carefully pull the LED lights off with a pair of tweezers. Once off, put in and connect a replacement.
    • Carefully pull the LED lights off with a pair of tweezers. Once off, put in and connect a replacement.

Sonuç

To reassemble your device, follow these instructions in reverse order.

Shreya Sunny

Üyelik tarihi: 04-09-2015

604 İtibar

6 adet Kılavuz yazıldı

Takım

USF Tampa, Team 2-2, Sullivan Fall 2015 USF Tampa, Team 2-2, Sullivan Fall 2015 üyesi

USFT-SULLIVAN-F15S2G2

4 Üyeler

7 adet Kılavuz yazıldı

0 Yorum

Yorum Ekle

İstatistikleri Görüntüle:

Son 24 Saat: 0

Son 7 Gün: 0

Son 30 Gün: 3

Her zaman: 153